Sources and Distribution Units
TSI-1509 DS-1 Programmable Source

TSI-1509A Amp Connector Rear View

TSI-1509A Wire Wrap Connector Rear View

Clock Stability 1.544MHz +/-30ppm, 0 to 50C.

Power: -48Vdc, Station Battery, 10 Watts.

Dimensions: 1.75"H x 15"W x 9"D
19" and 23" Rack Mount Standard.

Weight: 4 Pounds

Temperature: 0C to 50C Operating, -25C to 75C Storage

56 DSX-1 Outputs on rear panel wirewrap connectors, 0.156" pin spacing, optional AMP champ and DB-26 connectors. Outputs are organized into 7 groups of 8 outputs each. Each group may independently be set for framing, patterns, coding and error insert.

1 DSX-1 Bantam output on front panel, independently programmable. DSX-1 Outputs CB-119 Compatible.

Fail N.O. and N.C. contacts for power or internal circuitry fail, rear panel terminal block connection.

Front Panel Switches: Front Panel Indicators:
Group Select 1 to 8 (to select the 7 rear panel output groups or front panel output to be configured).

Pattern QRSS, all ones, 3 in 24, programmable 1 and 2 (Prog 1 defaults to all O's and Prog 2 defaults to 55 Octet), and Thru(data recovered from DS-1 Input).

Framing SF, ESF, or unframed.

Coding AMI or B8ZS.

Group Select 8 Segment Display

Frame Mode SF, ESF, Off.

Pattern QRSS, 1's, 3in24, PRG1, PRG2, THRU.

Code AMI, B8ZS.

Error Insert OFF, Single, 2x10-4, 2x10-6, 1x10-6, 1x10-7.

Fail (Internal circuit failure).

External Clock On.

Remote On Operation via RS-232C.

DSX-1 or DSX-1 Monitor Level terminal block connections.

RS-232C I/O DB-9 Male, 8 data bits, no parity, 1 start and 1 stop bit, 1200/2400/4800/9600 baud.


Telesync, Inc. reserves the right to update the product specifications without notice.
Copyright © 2004